300G Series
Model 328G4 EFI
Air-Cooled Gas
Power, efficiency and economy. The 328G4 is equipped with a vertical crankshaft Electronic Fuel Injection (EFI) Briggs & Stratton Vanguard engine that continuously adjusts fuel ratios while using less fuel. EFI engines provide reliable hot and cold starts, reduce emissions and minimize fuel-induced service issues.
Deck Sizes: 61
Mowing speeds up to 16.9 KPH and 2.36 Hectares/hr. based on 155cm cutting width.*
*Actual results may vary. Click Here for Details
B & S Vanguard Electronic Fuel Injection (EFI Engine) Engine
810cc V-Twin Briggs & Stratton Vanguard Electronic Fuel Injection (EFI)
OHV gasoline engine with vertical crankshaft and pressure lube run cooler and provide longer service life
Delphi-based closed-loop EFI engine continually adjusts fuel ratio to use less fuel and provide reliable hot and cold starts, reduced exhaust emissions and fewer fuel-related service issues
Automotive-style plug-in diagnostics
Facilitates faster and more precise service
Hydro-Gear ZT-4400 Transmission
The G4 Hydro-Gear ZT-4400 transmissions are designed to provide powerful, smooth response The heavy-duty, self-contained commercial transaxles are integrated with a cooling fan and feature 1-3/8-inch axles for longer service life. You’ll also enjoy best-in-class transmission fluid change intervals after a 100-hour break-in period, reducing costs and maintenance time.
Heavy-Duty Deck
- Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge
- Specially designed cutting chambers enhance airflow for better cut quality
- Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection
- Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength
- Spindle planes fabricated from double-layered, 10-gauge plus 10-gauge formed steel laminate that is 0.269 inch thick 7.6 percent thicker than ¼-inch steel
- Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion
QuikAjust™ Drop Pin Height Adjustment
- Raise and lower the deck easily with foot pedal and drop pin for precision cutting heights between 1.0 and 5.0 inches.
Reduced Maintenance
- Only two Access-Eze™ lubrication points cut maintenance time up to 95%
- Self-tensioning belts minimize cost and labor on routine maintenance
Warranty
Commercial Use: 3-year or 1,000-hour (whichever comes first); limited warranty: First two years covering parts and labor, last year covering parts only.
Residential Use: 4-year or 800-hour (whichever comes first); limited warranty: First two years covering parts and labor, last two years covering parts only.
Ultimate Operator Station™: View-Eze™ Console
Operational controls including throttle, choke and angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach.
Ultimate Operator Station™: QuikAjust Tilt™ steering levers
One- or two handed operation with QuikAjust Tilt™ dual levers with 9-inch comfort range to custom fit operator's reach. Levers automatically return to neutral from either forward or reverse position and are less strenuous than riding mowers with steering wheels.
Ultimate Operator Station™: Premium Comfort Seat
The deep-cushioned, deluxe Premium Comfort Seat features a coil-spring suspension and padded lumbar support for all-day comfort. Iso-mounting eliminates vibration before it reaches the seat, and both padded seat and foldable armrests are covered in scuff-resistant, breathable CoolTemp Cordura® fabric, which dissipates heat and won’t tear or crack with extended use.
Vigilant Operator Presence System™
- Standard, low profile Roll-over Protection System (ROPS) structure with an adjustable seatbelt
- Dampened steering levers that return to neutral from forward and reverse
- Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position
Rugged Construction
- Robotically-welded steel construction for long-lasting durability
- Centered-bearing design provides greater load-bearing capacity to handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts
- Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance
Premier Suspension Seat
The Premier Suspension Seat offers the ultimate in comfort and an extra measure of suspension while mowing over rough ground. Adjustable backrest, armrests and lumbar support with weight-adjusted suspension control provide maximum comfort for operators of all sizes and preferences.
Extended Steering Levers
Provides an additional two inches of leg clearance.
Low-Pressure Bar-Tread Tyres
Low-pressure, high-flotation bar-tread tyres flex with the terrain for maximum traction and minimize scuffing caused by wheel spin-out.
DuraFlex™ Suspension Forks
Optional DuraFlex™ Suspension Forks absorb the impacts of rough terrain to maintain a level cut, and can be set for use with PowerVac™ collectors.
Foldable ROPS
The Foldable ROPS allows the two-post ROPS to be lowered for mowing under low-hanging trees and other overhead obstacles, or for storing and transporting in enclosed trailers with low door clearance. CAUTION: Avoid drop-offs, embankments and steep slopes. Do not allow ROPS to provide a false pretense of security in hazardous areas and avoid questionable conditions. Always wear seatbelt when Foldable ROPS is in up-right position. When Foldable ROPS is down, DO NOT use seat belt, and drive with extra caution.
Sunshade Canopy Vinyl for ROPS
Lightweight, water repellent, UV-resistant vinyl canopy mounts easily to ROPS to limit exposure to direct sunlight, reducing eye strain and increasing operator comfort.
Side Discharge Control Kit
Control the discharge of the mower deck to avoid putting clippings in flower beds and on sidewalks on 52" decks and larger.
Sunshade Canopy Aluminum for ROPS
Diamond-plated aluminum canopy is highly resistant to abrasions. Easily mounts to ROPS to increase operator comfort by limiting exposure to direct sunlight and reducing eye strain.
LED Work Lights
LED work lights provide improved visibility in low light situations.
Down Discharge™ Mulching Package
The Down Discharge™ mulching package with GrassMax™ medium-lift blades cuts and recuts clippings and directs them deep into the grass bed, enriching turf and producing a beautifully manicured cut.
Electric Height Adjustment
The Electric Height Adjustment kit offers 1- to 5-inch height adjustment control from the operator's seat with the flip of a switch.
Speed-Trimming™ Roller Kit
The Speed-Trimming™ heavy-duty, anti-scalp roller kit for 52-inch and larger DuraMax® decks speeds close trimming near buildings, fences retaining walls and other landscaping features. Kits available for both left and right sides of cutting decks.
Michelin® X® Tweel® Airless Turf Tyre 24x12.00x12
24x12.00x12 turf-tread drive tyre, performs like a pneumatic tyre but without the inconvenience and downtime associated with flat tyres. Provides consistent hub height to ensure the mower deck produces an even cut and excellent lateral stability and outstanding operator comfort.
Michelin® X® Tweel® Airless Front Caster Tyre 13x6.50x6
Smooth tread, 13x6.50x6 caster wheel. Performs like a pneumatic tyre, but without the inconvenience and downtime associated with flats. Not for use with PowerVac Collection Systems, or with DuraFlex Suspension Forks.
Wide Seat Conversion Kit
Provides additional seating room for larger operators or to accommodate cell phones or pagers. Requires seat belt extension.
CleanSweep™ Rotary Brooms
Grasshopper True ZeroTurn maneuverability takes PTO-driven CleanSweep Rotary Brooms into places ordinary sweeper attachments can't go, speeding debris removal and snow removal in congested areas as well as long stretches of sidewalks, driveways and curbs, even outdoor hockey rinks.
MidMount™ PowerVac™ Collection Systems
With a PowerVac™ Collection System for your Grasshopper zero-turn mower, you're getting the most powerful, maneuverable and efficient leaf-collecting, grass-catching and debris-removing equipment available for turf. You'll get a professional, finished look every time you mow.